Skim Coat

SikaTop® Seal-107

SikaTop® Seal-107 - S-1098C (MY) is a two part polymer modi- fied cementitious waterproof mortar slurry comprising of a liquid polymer and a cement based mix incorpor- ating special admixtures. It is applied to concrete and mortar to prevent water infiltration.

SikaGrout®-215

SikaGrout®-215 S-1025.5C is a pumpable dual-shrinkage compensated, self-levelling, prebagged cementitious grout with extended working time to suit local ambient temperatures.

Sikalastic®-1 KMY

Sikalastic®-1 KMY S-10230C is a one component, flexible, fiber-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain.

LiquidRepair 1000

LiquidRepair 1000 is used to repair fine cracks of up to 1mm in width on interior and exterior cement rendered surfaces.

It is formulated with water repellent properties for long term repair. It comes ready to use, and can be applied even on emulsion painted surfaces.

CMI 781

CMI 781 S-1018C Wallskim SP is a premium quality polymer modified water resistant cement-based skim coat (top coat) for finishing on semi-exposed wall and ceilings.

CMI 681 Wallskim

CMI 681 S-1019C Wallskim SP is a premium quality polymer modified water resistant cement-based skim coat (top coat) for finishing on semi-exposed wall and ceilings.

CMI 381

CMI 381 S-1023C Base Mortar is a high-quality polymer modified water-resistant cement-based skim coat (base coat) for internal rendered, concrete walls or ceilings. It is also good for surface improvement works to block wall and concrete wall surfaces. It is certified with Singapore Green Label by Singapore Environment Council.

CMI® 281

CMI®  281 S-1023C Wallskim is a high-quality polymer modified water- resistant cement-based skim coat (top coat) for finishing on internal wall and ceilings.

CMI® Blockfix 187

CMI® Blockfix 187 S-1032.5C is a water-resistant, cement-based thin-bed adhesive specially formulated for jointing/ bonding of AAC (autoclaved aerated concrete) or ALC (aerated lightweight concrete) blocks, panels and lintels.

CMI 180

CMI 180 S-1015.5C Water-resistant cement-based tile adhesive for fixing ceramic glazed tiles for both floors and walls for internal applications.

It can be used for external areas or fixing homogenous vitrified tiles, glass mosaic and natural stones when mixed with CMI® Mortar Admix 380.

CMI 087

CMIProofCoat 087 S-1095C is semi-flexible 2 part acrylic modified cementitious waterproofing system. The 2 components react chemically to form a hard and elastic film which bond tenaciously to most concrete or masonry substrate to protect against possible ingress of water.

CMI® 081

CMI® 081 S-1017.5C Render is an environmental friendly, high quality polymer modified cement-sand plaster / render for application on block walls, brick walls, and concrete substrates at internal general area.

PENTENS T-200 P1085-230S is a newly developed Acrylic polymer waterproofing coating offering a hardness and durability.It resists ageing from heat, sunlight and ozone. It has excellent gas impermeability and toughness, and remains flexible at low temperatures.

PENTENS T-100 P1085-230S is a specially produced PU bituminous waterproofing compound for use on both internal and external surfaces. It will bond perfectly to almost any surface such as concrete, masonry, metal, and timber. It may be applied to new or existing structures and will bond to a damp surface.

PENTENS T-007 is a 100% acrylic cement modifier based on a proven 100% acrylic polymer designed to improve the chemical, corrosion, moisture and salt resistance of cement renders.

PENTENS LATEX-108 is a one-component, acrylic-based liquid resin, mix with normal Portland cement or white cement, used as a flexible adhesive, patching mortar, base coat and the
water-resistant. PENTENS LATEX-108 can only apply to sound, clean, dry, well prepared, frost-free surfaces.